Author Topic: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013  (Read 45089 times)

GingGangGooly

  • Newbie
  • *
  • Posts: 2
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #15 on: October 02, 2013, 12:11:33 PM »
Hi Martin

Here's a photo of my rather confined space with the ISO-TECH PSU sitting beside my HP meter.

Keep up the good work.

Cheers
« Last Edit: October 02, 2013, 12:18:03 PM by GingGangGooly »

jadew

  • Newbie
  • *
  • Posts: 2
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #16 on: October 03, 2013, 01:44:58 AM »
Hi Martin,

Long time viewer, first time poster.

Here's my desk/workbench:

shk1d29

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #17 on: October 03, 2013, 10:53:43 AM »
Hello Martin,

Thanks for all the very informative videos. Love watching and learning.

Here is my "workbench" setup. Its not much, but its all I need right now as I am still learning.

« Last Edit: October 03, 2013, 11:02:55 AM by shk1d29 »

G19shooter

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #18 on: October 03, 2013, 10:31:23 PM »
Hello!

Great forum and YouTube account! Here is my attempt at entering this giveaway. I "followed" ISO-TECHs google plus page but couldn't find out how to "plus" or "like" the page, but I am doing this all via my cell phone because my computer is down at the moment. Also, wasn't sure if I was supposed to add the pic of my "bench" to isotechs page or just here or both. At any rate, here is my bench with the power supply. I just got accepted to an electrical engineering program and I start in January--so at the moment I pretty much own nothing lol.


macross

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #19 on: October 04, 2013, 05:17:29 AM »
This is my workbench. Nothing fancy i have just started out in electronics hobby still collecting essential gear.


Uploaded with ImageShack.us

birrbert

  • Full Member
  • ***
  • Posts: 149
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #20 on: October 06, 2013, 04:18:15 AM »
Hi! I gave +1 and posted a comment on the ISO Tech Google+ page showing my wish to participate in the giveaway for the oscilloscope. I wasn't sure where to post, but I hope it's valid. Thanks!
"Dubito ergo cogito, cogito ergo sum." Descartes

ttyz

  • Newbie
  • *
  • Posts: 18
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #21 on: October 06, 2013, 04:33:03 AM »
Hello everybody,

Also left a comment and a +1 there. Looks like not a lot of viewers are entering for oscilloscope ;)
Cheers,
Evgeny

super G

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #22 on: October 06, 2013, 04:46:57 AM »
I'm starting up in electronics, so the power supply will be perfect for my bench.

MJLorton

  • Administrator
  • Hero Member
  • *****
  • Posts: 817
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #23 on: October 06, 2013, 09:28:01 AM »
Thanks to everyone for the great response thus far.

I know some of you have been working on power supply projects already and  they certainly can be entered.

I will give those folks starting from scratch the benefit to request a little more time if required.

At some point...this draw can't go on indefinitely...I will announce a date that the designs need to be completed using DesignSpark PCB.

Cheers, good luck and have fun doing it.

Martin.
Play, discover, learn and enjoy! (and don't be scared to make mistakes along the way!)

TNb

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #24 on: October 08, 2013, 05:07:57 PM »
Hi! I'm in! Need power supply since I have only 89's old Russian supply, which is awkward  to manage sometimes.

Science-Mark

  • Newbie
  • *
  • Posts: 2
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #25 on: October 09, 2013, 01:17:26 AM »
Thanks to you and Paolo for the contest:

My bench with my new (fingers-crossed) ISO-TECH power supply.



Cheers, Mark

rick

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #26 on: October 09, 2013, 03:15:25 PM »
Hi Martin,

I am a first time poster too here.
This is one of my workbenches. No shelves yet and it is a complete mess.
The other half is at a 90 degree angle so it is difficult to get it in the same picture and it is messier too...
I have 2 linear PSUs: 1 AA4tech and 1 HP6632b right now.
I am unwilling to open a google+ account.

sunny128

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #27 on: October 09, 2013, 11:29:20 PM »
Martin,
I am also a first time poster. I really enjoy the videos. I am learning a lot from your videos.
The ISO-TECH IPS3202 power supply would go really great on my work bench.
ISO-TECH's Google plus page
https://plus.google.com/117751407446156045720/posts


addytzu123

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #28 on: October 10, 2013, 10:41:52 AM »
Hi Martin

Thank you for the opportunity to ease our work with the professional ISO-TECH IPS3202 Power Supply!
Great tutorials, very well explained.
My small working space, with all my DIY soldering stations, 0-25 V power supply and ESR - meters.
The  ISO-TECH PS would be most helpfull when building various electronic boards  :)
I would have joined the Oscilloscope contest, cause my first successfull project, many years ago, was an AM radio (one transistor, no PCB), with a big tuning capacitor of wich I was quite proud at the time, but to be honest I'm not familiar with the Design Spark PCB software.
 Cheers, Adi

electros6

  • Newbie
  • *
  • Posts: 1
Re: ISO-TECH Giveaway! Power Supply and Oscilloscope - December 2013
« Reply #29 on: October 10, 2013, 11:06:18 AM »
Hi I am in for the competition.