Author Topic: The Fluke 87V gets challenged by TwinteX TM287  (Read 2392 times)

Kiriakos GR

  • Full Member
  • ***
  • Posts: 208
  • Industrial Electrician - IT
    • ITTSB.EU
The Fluke 87V gets challenged by TwinteX TM287
« on: September 28, 2012, 11:42:56 PM »
When another manufacturer challenges the Fluke 87V.... it is a interesting story, and must be shared.  ;) 

http://www.ittsb.eu/forum/index.php?topic=179.0

retiredcaps

  • Full Member
  • ***
  • Posts: 248

Kiriakos GR

  • Full Member
  • ***
  • Posts: 208
  • Industrial Electrician - IT
    • ITTSB.EU
Re: The Fluke 87V gets challenged by TwinteX TM287
« Reply #2 on: September 29, 2012, 04:41:10 PM »
Hi retiredcaps,
what makes the story interesting is mostly the PDF document which does the comparison. (ittsb link)
I do collect such diamonds ..  ;D

Other interesting finds in it, is orthographical mistakes, for example instead of Range ( rage ),
and another interesting marking is the best specs to be marked in red ( which should be the other way around).

I thought that my English was suck, but there is and worst examples out there..  ;) 

This document comes close to the Canadian TV show " Gags for laughs "  :D

SeanB

  • Administrator
  • Hero Member
  • *****
  • Posts: 1012
Re: The Fluke 87V gets challenged by TwinteX TM287
« Reply #3 on: September 30, 2012, 02:16:33 AM »
Kiiakos, the only time I see that is when I am in a queue at the bank, where it is part of the 20 minute customer info advertorial loop. Sometimes i get to see it 2 or 3 times..... ;( a day.