MJLorton Solar Power and Electronic Measurement Equipment Forum

Product Reviews => Product Reviews => Topic started by: retiredcaps on April 21, 2012, 01:34:35 AM

Title: Metrix MTX3282 user manual
Post by: retiredcaps on April 21, 2012, 01:34:35 AM

User manual at

http://www.sgemuhendislik.com/uploads/UserManual3281-82-83.pdf

I can just see Martin sleeping with this new multimeter by his bedside

PS. I think you HAD to test switching to ohms while on mains voltage.  Since it is not a rotary switch, what would happen if you accidentally hit the ohms button while plugged into mains?

Title: Re: Metrix MTX3282 user manual
Post by: MJLorton on April 21, 2012, 03:22:22 AM

LOL....I swear I didn't take there....it followed me!

Thanks for the link, I've used it in the show notes.

Yes...as for the ohms test....I literally had to not think and hit the button as I was very concerned what the end result might be....but you are correct...it could easily happen in practice so handy to know what the result would be.

Thanks for posting,
Martin.

Title: Re: Metrix MTX3282 user manual
Post by: HVAC Guy on October 30, 2012, 04:04:46 PM

Just watched your review of this meter and enjoyed very much. This is certainly an interesting meter configuration and is shown in the manual being worn on the users belt. I was wondering if it comes with a belt clip?

Title: Re: Metrix MTX3282 user manual
Post by: MJLorton on October 31, 2012, 05:35:05 AM

It is a great meter...still my favorite. It does not come with the belt clip, that must be an option accessory. 

Title: Re: Metrix MTX3282 user manual
Post by: HVAC Guy on October 31, 2012, 09:21:42 AM

Here is a link for a picture of the user wearing the meter, check it out it makes this unit easier to use in the feild.


http://www.atequip.com/pdfs/AEMC_MTX3283[1].pdf

It won't take you there if you click on the link. It wants to drop the pdf ext, copy and paste address and it will take you there.