MJLorton Solar Power and Electronic Measurement Equipment Forum
General Category => General Discussion => Topic started by: cossy350 on April 08, 2014, 04:33:15 PM
-
hi if any 1 can help me to find some part for a Tektronix 465 100 MHz Oscilloscope
The B timebase Trigger control shaft is slightly bent.
The Trigger Holdoff knob is cracked with bits missing.
The X position knob is cracked and the shaft is bent. The coarse control is fine, the fine is jamming.
The Y gain switch on channel knob.
The "Trig" and "Ready" LED's don't come on.
you can is it on my video https://www.youtube.com/watch?v=PZOq6qTuMiE
any help would be very appreciated thanks leon