MJLorton Solar Power and Electronic Measurement Equipment Forum
Older Technology => Older Technology => Topic started by: Mr Eastwood on April 02, 2015, 04:35:40 PM
-
Here's something I acquired the other day; so far I've checked the power supply, and cleaned and re-seated all the ICs; I've replaced a dull led and ordered some replacement 7 seg drivers to replace a bad one.
The MPU is an early 6503.
-
I replaced one of the drivers and left the unit on for 2 days to see if anything else would fail before I put it all back together again; when I get time I'll order a set of Kelvin clips for it.